SPECIFICATIONS: WFT452 LIGHTWEIGHT TRANSFER TRAILER
|
| LENGTH: |
45’-0" |
| WIDTH: |
102" overall |
| HEIGHT: |
13’-4" overall |
| WEIGHT: |
17,200 lbs. +/- 3% |
| KINGPIN: |
36" |
| COUPLER SECTION: |
Steel fabricated assembly with steel approach plate and steel side plates |
| SUSPENSION: |
Hutch H9700 weld-on undermount with 1 ¾" seats |
| SPRINGS: |
3-leaf steel |
| AXLES: |
(2) 5" dia.22,500 lbs. capacity, 77.5" track |
| BRAKES: |
16.5" x 7" S-cam, 20,000 lbs. capacity |
| HUBS: |
Cast steel with 10 studs on 11.25" BHC for hub pilot system |
| DRUMS: |
16.5" x 7" outboard Centrifuse |
| WHEELS: |
(8) 22.5 x 8.25 aluminum disc, machine finish, hub pilot |
| TIRES: |
(8) 11R22.5 Highway tread 14 ply |
| BRAKE SYSTEM: |
FMVSS 121 with anti-skid brakes |
| BACK-UP ALARM: |
Included |
| SUPPORT LEGS: |
2-speed box, 120,000 lbs. static capacity with a 13.5" minimum ground clearance |
| CROSSMEMBERS: |
Aluminum with end clips on 14.5" centers in the bay area and 12" centers in the front and rear subframe areas |
| BUMPER: |
Included in the rear frame |
| LIGHT BAR: |
.190" aluminum pan for the tail lights |
| FRONTWALL: |
Cropped corner design |
| SIDEWALL: |
.125" aluminum sidewall sheet riveted to the posts and rails with 3/16" stem and collar type fasteners |
| SIDEWALL POSTS: |
1.5" deep 6061-T6 aluminum extrusion hat section |
| LINER: |
None |
| DIVIDER: |
None |
| UPPER RAIL: |
Aluminum self-cleaning shape, one piece, 6061-T6 extrusion |
| LOWER RAIL: |
Aluminum, one piece, 6061-T6 extrusion |
| TOP REAR HEADER: |
Steel tube 4" x 4" |
| REAR SILL: |
Fabricated steel floor sill |
| REAR DOORS: |
¾" plymetal doors, galvanized inside panel, prepainted white exterior panel, double lock rods and 5-hinges per door, each door is reinforced with (2) vertical aluminum posts |
| WINDOW: |
(1) opening covered with expanded metal on the roadside of the front wall |
| REGISTRATION HOLDER: |
Mounted onto the front wall on the roadside |
| LIGHTS AND WIRING: |
FMVSS 108 system with LED (4) tail lights, triple I.D. lights, license light, (5) markers on each side of the top rail and the bottom rail, mid-turn signal and a sealed harness system for long life and trouble free connections |
| CONNECTIONS: |
Air and electrical connections centered on the front wall in the front crossmember |
| MOVING FLOOR: |
Moving floor for transfer station service, includes bearings on each crossmember and 1" hydraulic lines for pressure and return |
| LIDS: |
Optional |
| CROSSMEMBER: |
(1) steel tube section mounted in the middle and pinned at both ends |
| LID LIFTER: |
Optional |
| PAINT: |
white polyurethane enamel |
| SPLASH GUARDS: |
White anti-sail |