SPECIFICATION - M11 Lightweight Aggregate Trailer
|
|
CAPACITY:
|
11 yards struck without bang boards, 22 yards per set / with 12" riser, 29 yards |
| MATERIAL: |
High strength steel 45,000-psi minimum yield |
| DISCHARGE: |
(1) air operated clamshell gate, opening 43" x 58" |
| AIR CYLINDERS: |
6" diameter with (1) quick release valve on each cylinder |
| CONTRLS: |
Manual air/electric valve with cab control, valve is mounted on the roadside to the rear of the gate in a protected area |
| LIGHTS AND WIRING: |
12 volt DOT system with ATA 7-way receptacle, LED lights and sealed harness |
| BANGBOARDS: |
12" aluminum riser made in (2) 6" sections with slanted ends |
| SHED PLATES: |
.063" aluminum sheet Huck bolted onto the front and rear truss diagonals |
| SLOPE SHEETS: |
Aluminum sheet Huck bolted onto the steel frame |
| GATE ASSEMBLY: |
Fabricated aluminum with spreader chains |
| PAINT: |
White Polyurethane enamel |
| LENGTH: |
Semi trailer is 19’-10" overall and the pull trailer is 19’-6" overall |
| WIDTH: |
96" overall |
| SUSPENSION: |
Hutch H9700 single axle with single leaf composite springs on 38" spring centers, adjustable radius rod on one side and solid radius rod on the other side, 20,000 lbs. capacity |
| AXLES: |
5" diameter axles, 22,500 lbs. capacity, 71.5" track, automatic slack adjusters and oil seals |
| BRAKE SYSTEM: |
FMVSS 121 with the anti-skid feature |
| DRUMS: |
16 ½" x 7" Centrifuse outboard mounted |
| HUBS: |
Lightweight steel 10 stud on 11.25" BHC for the Hub piloted |
| WHEELS: |
(12) 22.5 x 8.25 aluminum disc, Hub pilot, machine finish |
| TIRES: |
(12) 11R22.5 highway tread 14 ply |
| SUPPORTS: |
Removable, slip-in non-adjustable stiff leg |
| COUPLER: |
One piece forged high tensile alloy 2" SAE kingpin, welded to the high strength steel coupler plate |
| FENDERS: |
Black high impact fenders at the rear and over the turntable axle |
| TURNTABLE: |
Full turn ball bearing |
| HITCH: |
Premier #270 |
| DRAWBAR: |
Weld-on eye and ACE cast hinge assembly |