Inter-Plant Bottom Dump
|
 |
 |
SPECIFICATION - ABD612 INTER-PLANT BOTTOM DUMP
|
| CAPACITY: |
29 Cubic Yards |
| HEIGHT: |
9' 1" |
| TRAILER WEIGHT: |
10,060 Ibs. +/- 3% |
| AIR CYLINDERS: |
(1) 7"dia. with (1) quick release valve on each cylinder |
| CONTROLS: |
Manual air/electric valve with cab control, valve is mounted on the road side to the rear of the gate in a proteced area |
| LIGHTS AND WIRING: |
12 volt DOT system with ATA 7-way receptacle LED lights and sealed harness |
| BANDBOARDS: |
6" aluminum with slanted ends |
| SHED PLATES: |
Aluminum sheet Huck bolted onto the front and rear truss diagonals |
| SLOPE SHEETS: |
High strength aluminum sheet Huck bolted onto the steel frame |
| GATE ASSEMBLY: |
.190" fabricated aluminum with spread chains |
| REAR FENDERS: |
High Impact Composite |
| PAINT: |
White Polyurethane enamel |
| WHEELS: |
(12) 22.5 x 8.25 Aluminum disc for hub pilot system |
| TIRES: |
(12) 11R22.5 Highway tread 14 ply |
| WIDTH: |
96" overall |
| SUSPENSION: |
Hutch H9700 single axle with Single Leaf Composite springs on 38" springs centers adjustable radius rod on one side and solid radius rod on the other side, 20,000 Ibs. capacity |
| AXLES: |
5" dia. axles, 22,500 Ibs. capacity, 71.5" track, automatic slack adjuster and oil seals |
| BRAE SYSTEM: |
FMVSS121 with the anti-skid feature |
| DRUMS: |
16 1/2" x 7" outboard mounted |
| HUBS: |
Light weight steel for outboard mounted drums w/ hub pilot system |
| SUPPORTS: |
Removable slip-on non-adjustable stiff leg |
| COUPLER: |
One piece forged high tensile alloy 2" SAE kingpin, welded to the high strength steel coupler plate |
| FENDERS: |
Black High Impact at the rear and over the turntable axle |
| TURNTABLE: |
Full turn ball bearing |
| HITCH: |
Premier #270 |
| DRAWBAR: |
ACE hinge type |
- Measurements, clearance and dimensions are approximate and describe a standard trailer
- Drawing is not to scale.
- Weights, if shown, are typical and will vary.
- All specifications, illustrations and information contained herein are based on the latest information available at the time of publication. American Carrier Equipment reserves the right to make any changes without notice or obligation.
WARRANTY
We warrant this product for one year from the date of delivery to be free from defect in material and workmanship; also that it will perform its intended job satisfactorily when under normal use and service. Our responsibility is limited to making good at our facility by repair or replacement of any part which upon our examination is found to be defective in its construction or application. All freight charges are for our customers account. All vendor parts carry their own warranty.