High Cube Light / Commodity Trailer
|
 |
 |
SPECIFICATION - BDC160 High Cube Light / Commodity Trailer
|
| CAPACITY: |
800 cubic feet or 29.6 cubic yards water level per trailer, 1600 cubic feet per set or 59 cubic yards per set |
| DISCHARGE: |
(1) air operated clamshell gate, opening 42" x 60" |
| AIR CYLINDERS: |
(2) 6" diameter with (1) quick release valve on each cylinder |
| CONTROLS: |
Manual air/electric valve with cab control, valve is mounted on the roadside to the rear of the gate |
| LIGHTS AND WRING: |
12 volt DOT system with ATA 7-way receptacle, LED lights and sealed harness |
| SLOPE SHEETS: |
.100" aluminum sheet Huck bolted onto the steel frame |
| SIDE SHEETS: |
.080" aluminum sheet Huck bolted onto the steel frame |
| SIDEWALL POSTS: |
6061-T6 aluminum extrusion hat section |
| GATE ASSEMBLY: |
.190" fabricated aluminum with spreader chains |
| PAINT: |
White Polyurethane enamel |
| LENGTH: |
18’ 6" overall |
| WIDTH: |
96" overall |
| HEIGHT: |
10’ 11" |
| WEIGHT: |
12,900 lbs. +/-3% |
| SUSPENSION: |
Hutch H9700 single axle with 3-leaf springs on 38" spring centers |
| AXLES: |
5" diameter axles, 22,500 lbs. capacity, 71.5" track |
| BRAKE SYSTEM: |
FMVSS 121 with the anti-skid feature |
| DRUMS: |
16 ½" x 7" outboard mounted |
| HUBS: |
Cast steel 10 stud on 11.25" BHC for the hub pilot disc wheel |
| WHEELS: |
(12) 22.5 x 8.25 aluminum disc, hub pilot, machine finish |
| TIRES: |
(12) 11R22.5 Highway tread 14 ply |
| SUPPORTS: |
Removable, slip-in non-adjustable stiff leg |
| COUPLER: |
One piece forged high tensile alloy 2" SAE kingpin, welded to the high strength steel coupler plate |
| FENDERS: |
Black high impact |
| TURNTABLE: |
Full turn ball bearing |
| HITCH: |
Premier #270 |
| DRAWBAR: |
Weld-on eye and ACE hinge assembly |
- Measurements, clearance and dimensions are approximate and describe a standard trailer
- Drawing is not to scale.
- Weights, if shown, are typical and will vary.
- All specifications, illustrations and information contained herein are based on the latest information available at the time of publication. American Carrier Equipment reserves the right to make any changes without notice or obligation.
WARRANTY
We warrant this product for one year from the date of delivery to be free from defect in material and workmanship; also that it will perform its intended job satisfactorily when under normal use and service. Our responsibility is limited to making good at our facility by repair or replacement of any part which upon our examination is found to be defective in its construction or application. All freight charges are for our customers account. All vendor parts carry their own warranty.