SPECIFICATION - ABD111 Aggregate Hoppers
|
| CAPACITY: |
12 yards without bang boards, 24 yards per set / with 16" riser 33 yards |
| GROSS PAYLOAD CAPACITY: |
64,000 lbs. per set |
| MATERIAL: |
High strength steel 45,000-psi minimum yield |
| DISCHARGE: |
(1) air operated clamshell gate, opening 48 ½" x 63 ¾" |
| AIR CYLINDERS: |
(2) 6" diameter with (1) quick release valve on each cylinder |
| CONTROLS: |
Manual air/electric valve with cab control, valve is mounted on the roadside to the rear of the gate in a protected area |
| LIGHTS AND WIRING: |
12 volt DOT system with ATA 7-way receptacle, LED lights and sealed harness |
| BANG BOARDS: |
16" riser on the sides and 18" high steel on the ends |
| PUSH BAR: |
18" long steel assembly welded onto the rear of the pull trailer only |
| SHED PLATES: |
Aluminum panel on the front and rear truss diagonals |
| SLOPE SHEETS: |
16-gauge high strength steel |
| GATE ASSEMBLY: |
High strength steel with spreader chains |
| PAINT: |
White Polyurethane enamel |
| LENGTH: |
19’-10 5/16" overall |
| WIDTH: |
96" overall |
| SUSPENSION: |
Hutch H9700 single axle with single leaf composite spring on 38" spring centers, adjustable radius rod on one side and solid radius rod on the other side, 20,000 lbs. capacity |
| AXLES: |
5" diameter axles, 22,500 lbs. capacity, 71.5" track, automatic slack adjusters and oil bath seals |
| BRAKE SYSTEM: |
FMVSS 121 with the anti-skid feature |
| DRUMS: |
16 ½" x 7" cast steel outboard mounted |
| HUBS: |
Lightweight steel 10 stud on 11.25" BHC for the hub pilot disc wheel
|
| WHEELS: |
(12) 22.5 x 8.25 PPW steel disc, hub pilot |
| TIRES: |
(12) 11R 22.5 highway tread 14 ply |
| SUPPORTS: |
Removable, slip-in non-adjustable stiff leg |
| COUPLER: |
One piece forged high tensile alloy 2" SAE kingpin, welded to the high strength steel coupler plate |
| FENDERS: |
Black high impact fenders at the rear and over the turntable axle |
| TURNTABLE: |
Full turn ball bearings |
| HITCH: |
Premier #270 |
| DRAWBAR: |
ACE/Fruehauf type with bushings and ACE/Fruehauf type cast hinge assembly |